Powder Coating Service In Akron Ohio

Powder Coating is a dry finishing process that uses a powder color instead of paint. This powder is then bonded to the surface of metal, or other surfaces by an electrical current. Finally the item is baked in a curing oven in order to create a smooth finish. Powder coating creates a hard finish that is usually more durable than other conventional painting methods.

Powder coating is generally much stronger than paint because it is electrostatically applied and then cured under heat or ultraviolet light. This process binds the colored powder to your item therefore making it a very strong finish.

Powder coating has many advantages when you’re trying to finish metal, or other electrical charge holding materials. Here are some of the great advantages:

1. Strong Coating – Since the powder is electrically bonded to your item it makes for a very strong coating.
2. Many Different Colors & Finishes –With many differnt colors and finishes your options are almost endless.
3. Low Maintenance –After application your powder coating doesn’t require much maintenance becuase it’s high durable and scratch/corrosion resistant.
4. No Toxic Fumes – Unlike some smelling, fuming paints, powder coating releases very little, if any fumes into your environment.
5. Affordable –With affordable powder cost and long lasting finish it’s very affordable to powder coat.
6. Long Lasting –Extremely durable and long lasting.

Powder coat finishes can last up to 20 years when properly taken care of. Exposure to UV light, outdoors environments, and other harsh elements may break down your powder coat finish quicker. Some finishes can last longer depending on the type of powder coating used.

Powder coating is highly rust resitant and usually does rust, but it is not completely rust proof. If your powder coated item gets damaged small cracks in the coating could appear which may allow moisture and eventually rust to form.

Materials that don’t hold an electrical charge are usually not able to be powder coated. Here is a list of some of the most common materials that can’t be powder coated.

• Wood
• Glass
• Plastics
• Fabric
• Other Items Without A Charge

Powder Coating any item requires you to sandblast the surface of the material. This not only removes dirt and other grim from your item, but it also leaves behind small scratches. These small scratches make it easier for your powder coat job to adjere to therefore drastically enhancing the longevity of your powder coating job.

There are three main categories when it comes to powder coating. Thermosets, thermoplastics, and UV curable powder coatings.

Powder Coatings are generally more resistant to chemicals than epoxy coatings. They are also more environmentally friendly and easier to apply than epoxy.

Polyester Powder Coating or PPC is a very popular choose because it is a waterproof finish.

It’s NOT recommended to powder coat over paint because the paint can interfere with the powder coat bonding process therefore making the bond weaker which drastically decreases your powder coatings capability.

1 Ib of Powder Coating covers around 192.3 square feet.

You should never use solvents such as acetone, contact cleaners, paint thinners, or methyl ethyl ketone to clean powder coat finishes because they will soften, dissolve, or completely remove your powder coat finish.

Powder coating does not fill in cracks and can actually make them look worse by making them easier to see.

Most of the time you can recoat over a powder coat finish for it to look like new.

Using Isopropyl Alcohol or methylater spirits on powder coated surfaces should not damage the finish although some sunscreens are known to damage powder coat finishes.